Seymour Duncan SHAPE SHIFTER Stereo Tremolo Guitar Pedal

Description

The Shapeshifter is true-bypass stereo pedal that conjures the classic tremolo effects youd expect, but with complete control over the Wave, Shape, Speed, and Depth of your sound. The pedal allows for shape and wave controls, phase control in stereo, and tap tempo with an LED indicator and ratio option. Tweaking those parameters enables you to capture unique sounds other pedals cant. Go from an out of this world phase to a more traditional British tube amp shimmer with the turn of a knob. If you need some non-traditional effects like a helicopter chop or coax an organ or vibraphone sound out of your guitar, the versatility to do so is there. Whether its a classic tremolo vibe or adding a cool, warbling tone to your pallet of sounds, the versatility of the Shapeshifter can get you there.

• Type of Circuitry: Pure analog signal path, Stereo Input/Output, Digital tremolo timing
• Input Impedance: 1 Meg Ohm
• Output Impedance:1.2K Ohm
• Gain: 2.0dB maximum
• Max Tremolo Depth: 30dB
• Max Output before Saturation: 2.5V RMS
• Noise: < 97dBV
• Frequency Response: Wideband; -3dB at 3Hz and 50 kHz
• THD: < 0.3% @ 1 kHz, 1VRMS
• Depth: Continuously adjustable from 0 to 30dB
• Rate: Continuously adjustable from 0.5 to 15 Beats per second
• Rate/Ratio Switch: Works in conjunction with the Tap Tempo Footswitch and the Rate control.
• Allows setting tempo by direct taps or applies a multiplication factor for faster tempos.
• Shape (Duty Cycle): Continuously adjustable from 10% to 90%
• Wave: Continuously adjustable, sine to triangle to square waves
• Phase Control: Continuously adjust phase between left and right output channels from
• 0 degrees to 180 degrees
• Power: 9V battery or 9 – 18 Vdc regulated adapter, center pin negative polarity.
• Current Consumption: 13mA operate, 12mA bypass
• Bypass: True hard-wire bypass
• Dimensions: 3.50″ wide X 4.70″ deep X 1.60″ tall
• Weight: 0.9 lbs